How to mount a pole on the roof

Read Time:5 Minute, 39 Second

How to mount a pole on the roof

How to mount a pole on the roof Most of the time, the great region to place a wi-fi router might be on the roof of your private home or organization`s building. Every roof is unique, so this manual can`t cowl each possibility!

We are simply masking your alternatives here, it is going to be up to your great judgment to determine which technique to use.

First and foremost – whilst running on any roof, be very careful. Any slip or slide may want to result in an extended fall, and critical harm or death.

If you aren`t cushy running at the roof, do not do it.

Get a few assists! Ask around your network and spot if there are any expert roofers, cable TV or telecellsmartphone installers, or different people who have enjoyed running in locations like this.

There are simple sorts of roofs: flat and pitched.How to mount a pole on the roof

Flat roofs are frequently the perfect to paint on and the safest. Pitched roofs are slanted, and in a few instances very steeply slanted. We propose to simplest paintings on a roof with a shallow roof pitch.

In the image below, the roofs withinside the pinnacle row are safest, at the same time as the lowest rows of roofs are probable to be elaborate and dangerous.

Examples of roof pitches How to mount a pole on the roof

With both roof types, there are lots of roof coverings and sealants to be conscious of. These all shield the roof and make it waterproof. The maximum crucial rule whilst putting something on a roof:

in no way drill any holes withinside the roof floor itself. Even if the holes are sealed properly, they’ll subsequently leak, and result in troubles withinside the lengthy run.

Chimney Attachments How to mount a pole on the roof

When there’s a tall chimney on the roof, we will mount a pole, mast, or pipe to the roof with the usage of one every of techniques: drilling anchors to keep a pipe into the chimney, or the usage of a strap mount. It is as much as you in case you need to drill holes in your chimney.

If your chimney is lacking bricks, and mortar, or does now no longer appears to be in desirable shape, please do now no longer mount something to it! These will usually be paintings on both flat or pitched roofs.

Anchor Mount How to mount a pole on the roof

The usual anchor mount is made of old-fashioned portions of metallic, that you connect to the chimney with screws and anchors. Kits are on occasion to be had at Radio Shack, or online:

A piece of electrical conduit, pipe,

or antenna mast may be used, as those kits don`t encompass one. The nearby hardware shop ought to be capable of assisting with this. You will simplest want approximately four to five ft of the mast, however, ensure it’s far painted or galvanized so it does now no longer rust!

Holes need to be drilled into the chimney

with this technique, and plastic or lead sleeve anchors need to be located withinside the holes. Sets of those are common to be had from the hardware shop.

You can then screw withinside the mounting brackets, and the anchors will keep it into the brick. Use brackets, as simply one isn`t robust sufficient. Attach the pipe or mast to the brackets, and dangle the wi-fi router to the pipe.

Strap Mount

Strap mounted strap mount makes use of metallic straps wrapped across the chimney, which might be tightened with a wrench to steady brackets for a pole. Usually, those need to be ordered online:

CSIpf A piece of electrical conduit,

pipe or mast may be used, as those kits don`t encompass one.
The nearby hardware shop ought to be capable of assisting with this. Strap mounts require no holes to be drilled into the chimney, so they can be a great choice on older chimneys wherein the brick is softer.

Use strap and bracket sets, as one isn’t always robust sufficient to keep the mast. Once the straps are wrapped across the chimney and tightened, the mast may be connected to the bracket, and the wi-fi router may be connected to the mast.

Vent Attachments

Vent mount image when there’s a robust vent stack pipe popping out of the roof, we will mount a mast to it to increase the height. There are diverse sorts of mounts, however, they may be all made of portions of metallic

which bolt across the vent stack and your mast, and fix them firmly together. You can also additionally have good fortune at your nearby hardware shop or Radio Shack locating one, however, they may be usually to be had online:

A piece of electrical conduit, pipe,

or antenna mast may be used, as those kits don`t encompass one. The nearby hardware shop ought to be capable of assisting with this. You will simplest want approximately four ft of the mast, however, ensure it’s far painted or galvanized so it does now no longer rust! It is crucial to observe which you ought to simplest mount to a metallic vent stack.

A plastic or PVC vent is simply

too vulnerable to keep a mast – through the years the wind will shake the mast and motivate the plastic vent to crack. The vent additionally wishes to protrude at least a foot out of the roof in case you are the usage of a mast four ft or extra in length.

This lets in for the 2 vent stack mounts to be spaced 10” to 12” apart. If your mast is simplest a foot or lengthy, you are probably capable of escape with an unmarried mount.

Eaves Attachments

Eaves mount images are located on the quit of a pitched roof, wherein different techniques may not paintings. It won`t paint on a flat roof, as there commonly isn’t always an eave! It needs to be drilled into the timber helps of the roof.

There are diverse kits with exclusive lengths of backside help, however, search for adjustable fashions which could stretch out to great match your roof

As in all of those installations,How to mount a pole on the roof

a galvanized or painted antenna mast is required. Since you’re mounting this to the trim forums alongside the threshold of your roof, ensure they may be in desirable shape.

Rotten timber may not keep up properly and the mount can also additionally fall out or in addition harm your roof in excessive winds.iycos There ought to be. How to mount a pole on the roof